CX-24
Vinyl Cutter
The Desktop Signmakers CX-24
Precision vinyl cutting
Unbeatable reliability
30-200g blade force
Roland CAMM-1 desktop vinyl cutter represents the most cost-effective way to produce banners, vehicle graphics, store displays, point-of-purchase materials, informational signs, backlit displays and almost any other type of durable custom graphics. The CX-24 (27.5-inches wide) offers exceptional performance, unbeatable reliability and unmatched value.
- Compatibility with industry standard vinyl widths
- JOG dial controls the rotate, speed, downforce and offset control
- Precise cutting speeds from .40 to 15.75 inches per second
- Store up to 8 custom settings for later use
- Three custom offset increments of 0.175, 0.250 and 0.500 mm
- Three origin point settings, adding front edge material sensing
- Advanced curve-smoothing function
Features
Precision Cutting
The CX-24 delivers a curve-smoothing function that allows precise cutting speeds from .40 to 15.75 inches per second. A test-cut function lets users check downforce before actually cutting.
Meets Industry Standards
The CX-24 will cut a variety of industry-standard materials, including vinyl, paint mask, reflective vinyls, sandblast and even environmentally safe vinyl chloride-free media. It's also compatible with all professional signmaking software.
Optical Registration
The CX-24 includes an optical registration feature that allows crop marks produced by a variety of print-only devices to be recognized and aligned so that graphics can be accurately contour cut.
Small And Intricate Designs
Blade offset values can be adjusted manually for optimum results on a wide range of materials. An optional small-lettering blade produces sharp, hi-quality results for small and intricate designs.
Functional Panel
In addition to a large jog dial and LCD display, the control panel has a blade groove on its apron for easy manual cutting. A sheet roller base is attached to every CX-24 to keep media feed straight.
Windows Driver
Just like a desktop printer, the CX-24 includes a Windows driver that allows users to output directly from vector-based design software. Processing time is reduced thanks to a built-in 1 MB buffer.
Specifications
CAMM-1 Desktop
| |
CX-24 |
|
MAX. CUTTING WIDTH |
23" (580 mm) |
|
ACCEPTABLE
MEDIA WIDTH |
1.938" - 28" (50 - 711 mm) |
|
MAX. CUTTING SPEED |
16 IPS (40cm/s) |
|
FEED SYSTEM |
Friction |
|
BLADE TYPE |
Swivel |
|
INSTRUCTION
SYSTEM |
CAMM-GL III (mode 1 and mode 2) |
|
POWER
CONSUMPTION |
0.8A/117V, 0.4A/220-230V, 0.4A/240V |
|
ACOUSTIC NOISE
LEVEL |
Cutting mode: less than 70dB(A);
Standby mode: less than 40dB(A); (According to ISO 7779) |
|
BLADE FORCE |
30gf - 200gf |
|
BUFFER SIZE |
1 MB standard |
|
DIMENSIONS
(W x D x H) |
33.125" x 11" x 8.725"
(840 x 278 x 221 mm) |
|
WEIGHT |
30.9 lbs. (14 kg) |
|
ENVIRONMENTAL
REQUIREMENTS |
Temperature: 41 - 104 deg. fahrenheit (5 - 40 deg. celsius),
Humidity: 35 - 80% (non-condensing) |
