FiberSource Q150 SPECIFICATIONS |
|
 | Description | 
 | The FiberSource Q150 is a dedicated light source for fiber optic lighting applications. It uses a long-life 150 W discharge lamp. |
|
| | Physical |
| Length: 230 mm (9.1 in) |
| Width: 317 mm (12.5 in) |
| Height: 139 mm (5.5 in) |
| Weight: 5 kg (11 lbs) |
| | | | Source |
| Lamp: 150 W discharge |
| Approved models: OSRAM HQI-R |
|
| | Installation |
| Mounting points: Four 6 mm holes in base |
| Orientation: horizontal, or vertical with lamp horizontal |
| Minimum distance to combustible materials: 0.1 m (4 in) |
| Minimum clearance around fan and air vents: 0.1 m (4 in) |
|
| | Thermal |
| Maximum ambient temperature (Ta): 40° C (104° F) |
| Maximum surface temperature: 65° C (149° F) |
| Total heat dissipation: 615 Btu/hr |
| | | | AC Supply |
| AC input: 3-pin IEC male socket |
| Wiring options, "EU" model: 230/240/250 V, 50 Hz |
| Wiring options, "US" model: 220/230 V, 60 Hz |
| Maximum power and current: 180 W, 0.9 A @ 230 V |
|
| | Design standards |
| EU EMC: EN 50 081-1, EN 50 082-1 |
| EU safety: EN 60598-1, EN 60598-2-17 |
| Canadian safety: CSA C22.2 NO 166 |
| US safety: ANSI/UL 1573 |
| | | | Construction |
| Housing: steel and aluminum |
| Finish: black electrostatic powder coating |
| Protection factor: IP 20 |
|
| | Ordering information |
| FiberSource Q150 EU; 230V, 50 Hz: 90520200 |
| FiberSource Q150 UK; 250V, 50 Hz: 90520202 |
| FiberSource Q150 US; 220V, 60 Hz: 90520300 |
| | | | Accessories |
| Fiber adaptor kit for 50 - 300 fibers: 91611016 |
| Fiber adaptor kit for 300 fibers: 91611015 |
| 52 x 52 mm color filters: see user manual |
|
| | Included items |
| OSRAM HQI-R discharge lamp: 97010101 |
| (EU/UK models) Mains cable, 1.5 m IEC 3-pin with Schuko cord cap: 11501011 |
| (US model) Mains cable, 2 m IEC 3-pin with Edison cord cap: 11501501 |
| User manual: 35000044 |
|
| | Sample project specification |
| General
The luminaire shall be a dedicated fiber optic illuminator with a 150 watt discharge lamp. |
| Cable interface
The luminaire shall be provided with a removable fiber optic cable adapter. The adapter shall accommodate cables from 8.3 to 19.3 mm (0.327 - 0.760 in.) in diameter. |
| Housing
The luminaire shall be constructed of sheet steel and aluminum. The exterior finish shall be an electrostatically applied powder coating. The color shall be black. |
| Color filters
The luminaire shall accept a square 52 x 52 x 1.1 mm dichroic glass color filter. |
| Installation
The luminaire shall be capable installation with the base horizontal or vertical. It shall provide four holes of 6 mm (15/64 in.) diameter for attachment. A clearance of no less than 10 centimeters (4 in.) shall be provided at the front and back of the luminaire for ventillation. |
| Electrical
The luminaire shall operate on 60 Hz supplies at 220 and 230 volts. (Substitute for EU model: The luminaire shall operate on 50 Hz supplies at 230, 240, and 250 volts.) It shall be fitted with a three-prong male IEC socket for connection to AC power. The luminaire shall be electrically grounded. The luminaire shall be cETL certified for compliance with CSA standard C22.2 No. 166 and ETL certified for compliance with ANSI/UL standard 1573. (Certification pending.) It shall conform with EU safety standards EN 60598-1 and EN 60598-2-17, and with EU electromagnetic compatibility standards 50 081-1 and 50 082-1. |
| Environmental
The ambient temperature of the luminaire's operating environment shall not exceed 40° C (104° F). |
| Physical
Size (LxWxH): 230 x 317 x 139 mm (9.1 x 12.5 x 5.5 in.)
Weight: 5 kg (11 lb.) |
|
|
