FiberSource CMY150 SPECIFICATIONS |
|
 | Description | 
 | The FiberSource CMY150 is an automated 150-watt color-changing luminaire for illuminating fiber optic cables in permanent installations. It has a weather-resistant IP rating of 44 that enables it to be used in outdoor installations. It features seamless CMY color mixing and full-range continuous dimming. The fixture may be operated with DMX controllers, in synchronization with other units (with or without a controller), and in stand-alone mode with programmable start and stop times. |
|
| | Physical |
| Length: 398 mm (15.7 in) |
| Width: 195 mm (7.7 in) |
| Height: 192 mm (7.6 in) |
| Weight: 8 kg (17.6 lbs) |
| | | | Source |
| Lamp: 150 W discharge |
| Approved models: Philips MasterColor CDM-SA/R 150W and Osram HQI-R 150W |
| Control: remote switchable |
|
| | Electromechanical effects |
| Cyan filter: 0 - 100% |
| Magenta filter: 0 - 100% |
| Yellow filter: 0 - 100% |
| Dimmer: 0 - 100% |
| | | | Control & Programming |
| Control options: DMX-512, Martin remote control, stand-alone, master/slave |
| Receiver: RS-485 |
| Setting and addressing: remote w/ uploader |
| Firmware update: serial upload (MUF) |
| Stand-alone trigger options: internal real-time clock with timer and light-level sensor |
| Stand-alone memory: 20 scenes |
| Data input: 1.8 m trailing cable w/ 3-pin XLR male |
| Data output: 1.8 m trailing cable w/ 3-pin XLR female |
| Data pinout: pin 1 shield, pin 2 cold (-), pin 3 hot (+) |
| DMX channels: 7 |
|
| | Installation |
| Minimum distance to combustible materials: 0.1 m (4 in) |
| Mounting points: 5 x 13 mm (0.5 in) holes |
| Minimum clearance around fan and air vents: 0.2 m (8 in) |
| Outdoor orientation: horizontal. |
| Indoor orientation: any |
| | | | Design standards |
| Canadian safety: CSA C22.2 NO 166 |
| EU EMC: 50 081-1, 50 082-1 |
| EU safety: EN 60598-1, EN 60598-2-17 |
| US safety: ANSI/UL 1573 |
|
| | Thermal |
| Maximum ambient temperature (Ta): 40° C (104° F) |
| Maximum surface temperature, steady state, Ta=40° C: 70° C (158° F) |
| Cooling: Filtered forced-air cooling system |
| | | | AC Supply |
| AC input: 1.8 m trailing cable w/o cord cap |
| Power supply options: 100/120/210/230/250 V, 50/60 Hz |
|
| | Construction |
| Housing: Plastic, ABS, Vo flame retardant |
| Color: RAL 7016, antrazit-gray |
| Protection factor: IP 44 |
| | | | Ordering information |
| FiberSource CMY150, 230V, 50Hz: P/N 90523000 |
| FiberSource CMY150, 120V, 60Hz: P/N 90523100 |
|
| | Accessories |
| Fiber adaptor, 350-800 pcs. (50 pcs. interval) Ø1mm fiber, D=38mm: P/N 91611034 |
| Fiber adaptor, 75-350 pcs. (25 pcs. interval) Ø1mm fiber, D=30mm: P/N 91611035 |
| MP-2 uploader: P/N 90758420 |
| MC-X controller, 220 - 245 V / 50 Hz: P/N 90718200 |
| MC-X controller, 110 - 120 V / 60 Hz: P/N 90718300 |
| Philips MasterColor CDM-SA/R 150W: P/N 97010113 |
| Osram HQI-R 150W: P/N 97010101 |
| DMX Address Device: P/N 90758430 |
| | | | Included items |
| User manual: P/N 35000102 |
| Philips MasterColor CDM-SA/R 150W: P/N 97010113 |
|
| | Sample project specification |
| General
The luminaire shall be an automated 150-watt color-changing luminaire for illuminating fiber optic cables in permanent installations. It shall employ a 150-watt discharge lamp as the light source. |
| Mechanical effects
The luminaire shall provide subtractive CMY color mixing using gradated, dichroic glass cyan, magenta, and yellow color filters. The intensity of the light shall be continuously adjustable by means of a mechanical dimmer that dims from 0 to 100% without loss of color temperature. |
| Control
The luminaire shall respond to the USITT DMX512 protocol and shall use 7 control channels. The color mixing and dimming fade speed shall be controlled, at the operator's option, via the cross-fade function of the control desk or a programmable speed value.
The luminaire shall be capable of stand-alone operation in which it executes defined or random color changes at programmable intervals and speeds. It shall provide a built-in 24-hour real-time clock and an ambient light-level sensor for control of operation start and stop times and/or light levels. |
| Housing
The luminaire shall have a plastic (Acrylonitrile Butadiene Styrene) housing with an antrazit-gray (RAL 7016) finish. The housing shall be cooled with the aid of a filtered forced-air cooling system. It shall be weather resistant, ingress protection class IP 44. |
| Installation
The luminaire shall operate in any orientation when installed indoors, or horizontally in outdoor installations. The luminaire shall provide 5 13 mm (1/2 in.) holes for mounting hardware. |
| Electrical
The luminaire shall provide settings for operation on 50 and 60 Hz supplies at 100, 120, 210, 230 and 250 volts. It shall be fitted with a 1.8 meter length of electrical cable for connection to AC power. The luminaire shall be electrically grounded. The luminaire shall conform to CE safety standards EN 60598-1 and EN 60598-2-17, and to CE electromagnetic compatibility standards EN 50 081-1 and EN 50 082-1. The luminaire shall be cETL certified for compliance with CSA standard C22.2 No. 166, and ETL certified for compliance with ANSI/UL standard 1573. (Certification pending.) |
| Environmental
The luminaire shall operate in ventilated areas at temperatures not to exceed 40° C (104° F). |
| Physical
Size (LxWxH): 398 x 195 x 192 mm (15.7 x 7.7 x 7.6 in) Weight: 8 kg (17.6 lbs.) |
|
