Exterior 200 SPECIFICATIONS |
|
 | | Description | 
 | The Exterior 200 is an automated 150-watt color-changing floodlight designed for fixed exterior installation. It features seamless CMY color mixing and full-range continuous dimming. The fixture may be operated with DMX controllers, in synchronization with other units (with or without a controller), and in stand-alone mode with programmable start and stop times and light levels. |
|
| | Physical |
| Length: 301 mm (11.5 in) |
| Width: 310 mm (12.2 in) |
| Height: 402 mm (15.8 in) |
| Weight: 15 kg (33 lbs) |
| | | | Source |
| Lamp: 150 W discharge |
| Base: GY 12 |
| Approved models: Philips CDM-SA/T 150W |
| Control: remote switchable |
|
| | Photometrics (Standard) |
| Light output (CDM-SA/T 150W, diffuser lens): 4515 lumens |
| Illuminance (lux or fc): 10604 cd / distance2 (m or ft) |
| Half-peak diameter: 0.66 x distance |
| Half-peak angle: 36.5° |
| One-tenth-peak diameter: 1.17 x distance |
| One-tenth-peak angle: 61° |
| Measurement conditions: Diffuser lens; no color or effects applied |
| Measurement source: Philips CDM-SA/T 150W |
|
| | Photometrics (Optional) |
| Light output (CDM-SA/T 150W, Fresnel lens): 4773 lumens |
| Illuminance (lux or fc): 32284 cd / distance2 (m or ft) |
| Half-peak diameter: 0.38 x distance |
| Half-peak angle: 21.4° |
| One-tenth-peak diameter: 0.62 x distance |
| One-tenth-peak angle: 34.6° |
| Measurement conditions: Fresnel lens; no color or effects applied |
| Measurement source: Philips CDM-SA/T 150W |
|
| | Photometrics (Optional) |
| Light output (CDM-SA/T 150W, beam shaper lens): 3741 lumens |
| Illuminance (lux or fc): 5018 cd / distance2 (m or ft) |
| Half-peak diameter: 0.80 x distance |
| Half-peak angle: 43° |
| One-tenth-peak diameter: 1.91 x distance |
| One-tenth-peak angle: 87° |
| Measurement conditions: Beam shaper lens; no color or effects applied |
| Measurement source: Philips CDM-SA/T 150W |
|
| | Electromechanical effects |
| Cyan filter: 0 - 100% |
| Magenta filter: 0 - 100% |
| Yellow filter: 0 - 100% |
| Dimmer: 0 - 100% |
| | | | Control & Programming |
| Control options: DMX-512, Martin remote control, stand-alone, master/slave |
| Receiver: RS-485 |
| Setting and addressing: remote w/ uploader |
| Firmware update: serial upload (MUF) |
| Stand-alone trigger options: internal timer and light level sensor |
| Stand-alone memory: 20 scenes |
| Data input: 1.8 m trailing cable w/ 3-pin XLR male |
| Data output: 1.8 m trailing cable w/ 3-pin XLR female |
| Data pinout: pin 1 shield, pin 2 cold (-), pin 3 hot (+) |
|
| | Installation |
| Minimum distance to combustible materials: 1 m (39 in) |
| Minimum distance to illuminated surfaces: 0.5 m (20 in) |
| Orientation: any |
| Lamp swivel: +/- 45° |
| Lamp tilt: -70°/+ 210° from the 9 o'clock position. |
|
| | Thermal |
| Maximum ambient temperature (Ta): 40° C (104° F) |
| Maximum surface temperature, steady state, Ta=40° C: 90° C (194° F) |
| Total heat dissipation: 682 BTU/hr |
| | | | AC Supply |
| AC input: 1.8 m trailing cable w/o cord cap |
| Power supply options: 195/210/225/245/277 V, 50/60 Hz |
|
| | Maximum power and current |
| 195 V, 50/60 Hz: 210 W, 1.2 A |
| 210 V, 50/60 Hz: 220 W, 1.1 A |
| 225 V, 50/60 Hz: 200 W, 1.0 A |
| 245 V, 50/60 Hz: 200 W, 0.9 A |
| 277 V, 50/60 Hz: 200 W, 0.8 A |
| | | | Design standards |
| Canadian safety: CSA C22.2 NO 166 |
| EU EMC: 50 081-1, 50 082-1 |
| EU safety: EN 60598-1, EN 60598-2-17 |
| US safety: ANSI/UL 1573 |
|
| | Construction |
| Housing: Extruded aluminum |
| Finish: Anodized, natural aluminum color |
| Front glass: 6 mm anti-reflective coated |
| Mounting bracket: 8 mm anodized aluminum |
| Housing-to-bracket attachment: 4 stainless steel M6 bolts, A2 DIN 933, 18.8 |
| Protection factor: IP 65 |
| | | | Ordering information |
| Exterior 200, 230V, 50Hz: P/N 90509000 |
| Exterior 200, 245V, 50Hz: P/N 90509002 |
| Exterior 200, 210V, 60Hz: P/N 90509004 |
|
| | Accessories |
| 36° fresnel lens: P/N 91610022 |
| 90° x 70° beam shaper lens: P/N 91610023 |
| MP-2 uploader: P/N 90758420 |
| MC-X controller, 220 - 245 V / 50 Hz: P/N 90718200 |
| MC-X controller, 110 - 120 V / 60 Hz: P/N 90718300 |
| Snoot/barndoor kit: P/N 91611031 |
| Extensions to Snoot/barndoor kit: P/N 91611032 |
| DMX Address Device: P/N 90758430 |
| | | | Included items |
| User manual: P/N 35000096 |
| Philips CDM-SA/T 150 W discharge lamp: P/N 97010111 |
|
| | Sample project specification |
| General
The luminaire shall be an automated color-changing washlight designed for fixed exterior installation. It shall employ a 150 watt discharge lamp as the light source. |
| Mechanical effects
The luminaire shall provide subtractive CMY color mixing using gradated, dichroic glass cyan, magenta, and yellow color filters. The intensity of the light shall be continuously adjustable by means of a mechanical dimmer that dims from 0 to 100% without loss of color temperature. |
| Control
The luminaire shall respond to the USITT DMX512 protocol and shall use 7 control channels. The color mixing and dimming fade speed shall be controlled, at the operator's option, via the cross-fade function of the control desk or a programmable speed value.
The luminaire shall be capable of stand-alone operation in which it executes defined or random color changes at programmable intervals and speeds. It shall provide a built-in 24-hour real-time clock and an ambient light-level sensor for control of operation start and stop times and/or light levels. |
| Performance
The luminaire shall be capable of emitting a total luminous flux of 4,515 lumens in a beam 61° wide, where the outside edge of the beam is defined as the circle having one-tenth the intensity of the beam´s midpoint. |
| Housing
The luminaire shall have an extruded and anodized aluminum housing and an anti-reflection coated front glass of 6 mm thickness. The housing shall be convection cooled, with the power supply and electronics section heat separated from the lamp and mechanics section. It shall be weather resistant, ingress protection class IP 65. |
| Installation
The luminaire shall operate in any orientation. It shall be supplied with a non-detachable mounting bracket that allows the luminaire manually to be tilted from +/- 140° in the vertical plane and swiveled +/- 45° in the horizontal plane. The mounting bracket shall be of 8 mm anodized aluminum, and shall provide 3 holes for 12 mm (1/2 in.) mounting hardware, spaced 100mm on center, and 2 quarter-circle slots with a center radius of 26.5 mm for 8 mm (5/16 in.) mounting hardware. |
| Electrical
The luminaire shall provide settings for operation on 50 and 60 Hz supplies at 195, 210, 225, 245, and 277 volts. It shall be fitted with a 1.8 meter length of electrical cable for connection to AC power. The luminaire shall be electrically grounded. The luminaire shall conform to CE safety standards EN 60598-1 and EN 60598-2-17, and to CE electromagnetic compatibility standards EN 50 081-1 and EN 50 082-1. The luminaire shall be cETL certified for compliance with CSA standard C22.2 No. 166, and ETL certified for compliance with ANSI/UL standard 1573. (Certification pending.) |
| Environmental
The luminaire shall operate in ventilated areas at temperatures not to exceed 40° C (104° F). |
| Physical
Size including base (LxWxH): 301 x 310 x 402 mm (11.5 x 12.2 x 15.8 in) Weight: 15 kg (33 lbs.) |
|
