MiniMAC Maestro SPECIFICATIONS |
|
 | | Description | 
 | The MiniMAC Maestro is an automated moving-head projector that provides 4 rotating slots for glass or metal gobo images, 16-bit gobo indexing, motorized focus, high-speed mechanical shutter, 540° of pan by 270° of tilt, 3-digit LED control panel, and switch-selectable power supply settings. It uses a 150 watt discharge source and may be operated with a DMX controller, as a stand-alone unit with master/ slave capability, and with a remote control device. |
|
| | Physical |
| Length: 390 mm (15.4 in) |
| Width: 316 mm (12.4 in) |
| Height: 415 mm (16.3 in) |
| Weight: 14.0 kg (30.8 lbs) |
| | | | Source |
| Lamp: 150 W discharge |
| Base: GY 9.5 |
| Approved models: Philips CDM-SA/T 150W |
| Control: remote switchable |
|
| | Photometrics (Standard) |
| Light output: 1000 lumens |
| Illuminance (lux or fc): 13,500 cd/distance2 (m or ft) |
| Diameter: 0.32 x distance |
| Beam angle: 18.3° |
| Measurement conditions: 230 V, 50 Hz; no effects applied |
| Measurement source: Philips CDM-SA/T 150 W lamp |
| | | | Electromechanical effects |
| Gobo wheel: 4 rotating slots + open |
| Gobo rotation: indexible and continuous |
| Shutter: variable speed flash effects |
| Focus: 1 m (3.3 ft) to infinity |
| Pan: 540° in 0.013° steps |
| Tilt: 270° in 0.007° steps |
|
| | Control & Programming |
| Control options: DMX-512, Martin remote control, stand-alone, master/slave |
| Stand-alone trigger options: internal timer |
| Stand-alone memory: 20 scenes |
| Receiver: RS-485 |
| Setting and addressing: 3-digit LED control panel, remote w/ uploader |
| Firmware update: serial upload (MUF) |
| DMX speed control: tracking and/or vector |
| DMX channels: 6 - 11 |
| Gobo indexing resolution: 8- and 16-bit |
| Pan/tilt resolution: 8- and 16-bit |
| Data I/O: locking 3-pin XLR, pin 1 shield, pin 2 cold (-), pin 3 hot (+) |
|
| | Installation |
| Mounting points: 1 pair of 1/4-turn locks for clamp bracket |
| Orientation: any |
| Minimum distance to combustible materials: 0.3 m (12 in) |
| Minimum distance to illuminated surfaces: 0.3 m (12 in) |
| Minimum clearance around fan and air vents: 0.1 m (4 in) |
| Minimum center-to-center installation distance: 316 mm (12.4 in) |
|
| | Thermal |
| Maximum ambient temperature (Ta): 40° C (104° F) |
| Maximum surface temperature: 55° C (131° F) |
| Total heat dissipation: 870 Btu/hr |
| | | | AC Supply |
| AC input: 3-pin IEC male socket |
| Power supply options: 100/120/210/230/250 V, 50/60 Hz |
|
| | Maximum power and current |
| 100 V: 260 W, 3.0 A |
| 120 V: 265 W, 2.5 A |
| 210 V: 245 W, 1.4 A |
| 230 V: 250 W, 1.2 A |
| 250 V: 255 W, 1.1 A |
| | | | Design standards |
| EU EMC: EN 50 081-1, EN 50 082-1 |
| EU safety: EN 60598-1, EN 60598-2-17 |
| Canadian safety: CSA C22.2 No. 166 |
| US safety: ANSI/UL 1573 |
|
| | Construction |
| Housing: UV-resistant fiber-reinforced composite |
| Finish: polyurethane coating |
| Available colors: white, titanium |
| Protection factor: IP 20 |
| | | | Ordering information |
| MiniMAC Maestro, in cardboard, titanium: P/N 90230600 |
| MiniMAC Maestro, in cardboard, white: P/N 90230630 |
|
| | Accessories |
| G-clamp: P/N 91602003 |
| Half-coupler clamp: P/N 91602005 |
| Remote control: P/N 90760010 |
| Infrared receiver: P/N 91611027 |
| 2-unit flight case: P/N 91510007 |
| | | | Gobos |
| Outside diameter: 37.5 +0/-0.3 mm (1.48 +0/-0.01 in.) |
| Maximum image diameter: 30 mm (1.18 in.) |
| Maximum thickness: 3 mm (1/8 in.) |
| Image orientation: True on coated side |
|
| | Included items |
| Philips CDM-SA/T 150 W discharge lamp |
| 3 m, 3-pin IEC mains cable |
| 5 m, black, 3-pin XLR data cable |
| Attachment bracket for mounting clamp |
| Safety cable eye bolt |
| User manual |
|
| | Sample project specification |
| General
The luminaire shall be an automated moving head gobo projector employing a 150 watt discharge lamp as the light source. |
| Mechanical effects
The luminaire shall provide one wheel with four positions for insertable images. Each position shall rotate continuously and shall stop at any designated angle. The image holders shall accept glass or metal media 37.5 mm (1.48 in.) in diameter and up to 3 mm (1/8 in.) thick. The holders shall be spring-mounted to facilitate removal from the wheel. The optical train shall include a motorized lens to provide variable focus from one meter to infinity. The focal length shall be 90 mm (3.54 in.). The luminaire shall provide a mechanical shutter to open and close the light output. The head of the luminaire shall rotate 270° on the tilt axis. It shall be mounted on an arm that rotates 540° on the pan axis. |
| Control
The luminaire shall respond to command signals from both USITT DMX512 compatible control devices and a proprietary infrared remote control. The luminaire shall have 3-pole male and female XLR sockets for serial data transfer. (Optional: For infrared data transfer, an infrared transmitter and receiver module shall be provided.) The luminaire shall provide onboard memory for the storage of 20 scenes that define image selection, rotation angle, focus, shutter position, pan and tilt angle, scene duration, and transition time. All user-selected software settings shall be adjustable via an onboard control panel with LED display. The luminaire's firmware shall be installable via serial upload. |
| Performance
The luminaire shall emit a luminous flux of 1000 lumens in an 18° focused beam with no image inserted. |
| Housing
The exterior of the luminaire shall be constructed of high temperature UV-resistant fiberglass-reinforced nylon with integral black color. The color of the top base cover and the covers for the arm and head shall be white or titanium. The housing shall provide a protection factor of IP 20. |
| Installation
The luminaire shall operate in any orientation. It shall be furnished with a bracket to which a mounting clamp may be bolted. The bracket shall attach to the base with quarter-turn fasteners. When installed above floor level, secondary attachment shall be fastened to the base of the luminaire. |
| Electrical
The luminaire shall provide switch-selectable settings for operation on 50 and 60 Hz supplies at 100, 120, 210, 230, and 250 volts. It shall be fitted with a three-prong male IEC socket for connection to AC power. The luminaire shall be electrically grounded. The luminaire shall conform to CE safety standards EN 60598-1 and EN 60598-2-17, and to CE electromagnetic compatibility standards EN 50 081-1 and EN 50 082-1. The luminaire shall be cETL certified for compliance with CSA standard C22.2 No. 166, and ETL certified for compliance with ANSI/UL standard 1573. (Certification pending.) |
| Environmental
The luminaire shall be located in a dry area in which the ambient temperature does not exceed 40° C (104° F). |
| Physical
Size: 390 x 316 x 415 mm (15.4 x 12.4 x 16.3 in.) Weight: 14.0 kg (30.8 lbs) |
|
