!

dB Technologies DVA S10DP

dB Technologies
DVA S10DP
Weight: lbs

 

 

DVA S10DP

ACTIVE

SUBWOOFER

18" 1000 Watts

 

 

 

 

 

The bandpass subwoofer DVA S10 is equipped with a single 18" RCF®-Neodymium woofer of the newest generation, driven by a 1000W digital power amp. Using the optionally available flyware, up to two DVA S10 can be flown mounted to the DRK-10 rigging kit. Further the DVA S10 can be used as a compact PA system together with either 3x DVA T4 on a speaker pole or 2x DVA S10 and 4-6 DVA T4 as a Groundstack.

 

The DVA S10 subwoofer is equipped with powerful RCF Precision woofers with neodymium magnets and a 4” voice coil for extremely high sound pressures. Double ventilation provides an optimum of cooling, a minimum of power compression at high reliability. The woofers are fibreglass reinforced and have a triple-roll coil embedded in a perfect edging with constant geometry. This combination makes an extreme peak-to-peak steering of up to 48mm possible.

 

The highly efficient digital power amps of both subwoofers do not need a fan cooling system. The integrated crossover ( 90/120Hz switchable), professional Power-Con mains connectors and a slot on the back of each subwoofer for the optional SDD delay-module are just a few highlights. Mounting points for the DRK-10 frame and threads on the back for taking the optional blue-wheels complete the picture.

DVA S10 cardioid bass setup with the SDD module

A cardioid setup comprising the SDD module and three DVA S10 subwoofers on each side keeps levels down on stage and affords you far greater control over low-frequency coverage in the audience area. Never before has this innovative solution

– which until today entailed much effort and audio gear – been so easy to achieve with such professional results

Specifications

 

Speaker Type Active Bandpass Subwoofer

Acoustical data

Frequency Response [+/- 3dB] 40 - 120 Hz
Max SPL 136 dB
Directivity Omnidirectional, Cardiod Option with SDD Module
LF 18 "
Type LF RCF Neodymium
Voice Coil LF 4 "

 

Amplifier

Amp Technology digipro
Amp Class Class D
LF Amp 1000 W/RMS
Cooling Convection

 

Processor

Controller Analog
Phase 0, 180 °
Limiter RMS, Peak, Thermal
Delay Option SDD Module
Crossover Frequency LF-MF 90, 120 Hz
Slope LF-MF 12 dB/Octave

 

Input Section

Signal Input 1x XLR fem, sym.
Input Sensitivity [dBu] -00 - -2 dBu
Signal Output 1x Link XLR, male, sym
1x X-Over Out, XLR male, sym.
Power Socket Powercon In/Out
Voltage Range 240 V

 

Mechanics

Housing Multiplex birch plywood
Housing Design Rectangular
Color Black, white
Surface Texture Textured acrylic lacquer
Handles 3x Side
Pole Mount 1x M20
Front Grille 1.5mm metall grille
Rigging Points Fly option with SRK 10
Castors Optional
Width 515 mm (20.6 in)
Height 640 mm (25.6 in)
Depth 720 mm (28.8 in)
Weight 46 kg (101.41 lbs)