!

Altman ZS-1 Borderlight / 1 Circuit

Altman Stage Lighting
ZS-1
Weight: lbs
+Shipping
bacoimage10h

  Altman

1 Circuit

10 Lamp Capacity

w/ Safety Screen

750 Watts Per Circuit

.

 

The Zip Strip is a UL listed multi-lamp striplight using a wide range of 12 volt MR-16 tungsten halogen lamps. This luminaire is manufactured of die-cast, extruded and sheet aluminum in four standard lengths. These lengths are related to the number of color washes desired. Narrow spot, medium and wide flood lamps are efficiently incorporated into the Zip Strip without trapping appreciable light from these lamps. Since 10 lamps operate in series for each color circuit, lamp failure is noted by neon indicator lamps. Spring loaded lamp holders with push-on sockets provide secure positioning of the lamps to hold them in place while touring. This narrow luminaire allows it to be used on closely spaced battens or in tight spaces where a general wash of light from the top, side or bottom is desired.

Features

Rugged lightweight die-cast, extruded, and sheet aluminum construction
Uses wide variety of MR-16 lamps
Compartmented for color separation
Neon indicator lamps to identify lamp failure
Spring loaded lamp holder and push-on 2 pin socket
Large lamp ports to minimize light trapping
Narrow profile
Multiple circuit units have three 36" feed through lead wires per circuit
Up to 25' of Hi-Temp rubber cable optional
Color frames and safety screens included
Safety screen provided, safety glass optional
U.L. and c.U.L. listed for 750 watts per circuit

 

Specifications

Housing: Die-cast, extruded, and sheet aluminum construction.
Materials: Construction employs all corrosion-resistant materials and hardware.
Lamp Replacement: Lamp replacement performed without use of tools.
Rating: 120/240 volts AC/DC operation, 6.3/3.1 amps per circuit, 750 watts per circuit maximum. 75 watt maximum lamps. Note: 240 volt units require special wiring.
Socket: Miniature 2-pin, GU5.3, with heat shield.
Cable: 36" Teflon and/or silicone-fiberglass leads encased in black fiberglass sleeving. ZS-2, ZS-3, and ZS-4 are feed through wired. Hi-Temp rubber cable
optional, up to 25'.
Trunnions: Rigid 16 gauge steel, double trunnions for supporting two fixtures optional.
Hanging Arms: 3/16" strap steel, five mounting positions.
Access Door: Hinged, can be opened without use of tools.
Finish: Baked black enamel, electrostatic application.
Safety Screen: Stainless steel.
Accessories: Each pair of lamps accepts one color frame.
Weight: Approx. 15 lbs. for ZS-1, approx. 30 lbs. for ZS-2, approx. 45 lbs. for ZS-3, & approx. 60 lbs. for ZS-4.

Accessories

Supplied with Luminaire
ZS-CF Color Frame (one frame per pair of lamps)
ZS-FT Floor Trunnion, pair
OR
508 Hanging Arm with Pipe Clamp, pair
Additional Accessories
ZS-DFT Double Floor Trunnion, pair (supports two Zip Strips)
ZS-CFT Castered Floor Trunnion, pair
ZS-CDFT Castered Floor Trunnion, pair (supports two Zip Strips)
510 Malleable Iron Pipe Clamp

Lamp Data

Lamp Type Watts Volts Rated Lift (Hours) Beam Angle (Degrees) Field Angle (Degrees) Candelpower (Candela) Color Temp (°K)
EYF 75 12 4000 14° 30° 11,000 3050
EYJ/BBG 75 12 4000 25° 40° 4500 3050
EYC 75 12 4000 40° 51° 2000 3050
FPA 65 12 3000 14° 30° 11,000 3000
FPC 65 12 3000 27° 40° 4500 3000
FPB 65 12 3000 38° 51° 2000 3000
EXT 50 12 5000 13° 30° 9000 3050
EXZ 50 12 5000 24° 40° 2500 3050
EXK 50 12 5000 32° 46° 2000 3050
EXN 50 12 5000 40° 52° 1500 3050
EYR/EYS/EZY 42 12 3500 10° 26° 11,000 3000
EYS 42 12 5000 20° 36° 2700 3000
EYP 42 12 4000 36° 44° 1000 3000
EZX 20 12 3000 8° 20° 8000 2900
ESX 20 12 4000 12° 30° 3200 2900
BBF 20 12 3000 24° 40° 1000 2900
BAB 20 12 4000 36° 48° 450 2900

When ordering ZIP STRIPS, specify the hardware. ZS-FT Floor Trunnions are standard equipment. 508 Hanging Arms with Pipe Clamps may be substituted.

Safety Glass may be substituted for safety screen. The ordering code for this feature is to add “-G” after the catalog number. (example: ZS-1-G)