!

Martin Roadie X Stream

92230400
Weight: lbs
roadiex-stream15

Roadie X Stream

 

  • Powerful Smoke Machine
  • dmx Control

 

  • 5000w heater 

  • 10 minute heat up time 

  • DMX operation 

  • Analogue link sockets 

  • Approx. 5000m3 smoke output 

  • Fluid level sensing 

  • Output level control 

  • 2 x 9.5 liter fluid containers 

  • Continuous smoke output 

  • Direct Thermal Protection Device

 

The Roadie is a Jem classic, a rugged touring smoke machine which saw service on some of the decades classic tours such as the Rolling Stones and Pink Floyd. The Roadie X-Stream is the only fogger capable of filling the largest stadium stages featuring a huge 2x9.5 liter fluid capacity, a high output fan and continuous high output thanks to the twin block, 4 output, 5000W vaporizing system.
    Like its forerunner, the Roadie X-Stream is capable of projecting a variety of effects, from a controlled haze, to a high-density fog, over a very large area. The remarkable output and length of projection is largely due to Jem’s unique ‘X-Stream’ airflow system ensuring long throw smoke projection.
    On board controls allow for independent smoke possibilities and auto-timer control while fan levels ensure perfect effect mixing. A rugged hand held remote control is also included. Control via DMX is a standard feature.
    It is a must that a smoke machine withstands the heavy treatment associated with today’s tours as well as operating in an open-air environment. The Roadie X-Stream’s high output and strong and durable construction make it suitable for all outdoor events – even in bad weather. Unique overheat protection is guaranteed through a Direct Thermal Protection device.
    Large discotheques, film and production studios, as well as fire training and disaster simulations will also find the new Roadie X-Stream a useful smoker or hazer. The Roadie X-Stream’s rugged construction makes it the obvious choice for touring production companies.

Roadie X-stream SPECIFICATIONS

Heater size

5000w
Total power consumption

25A @ 208-240v
Fuse rating

10 Amps per heater @ 208-240v

On-board 25 Amp breakers
Heat up time

18 mins
Operation time

Continuous
Over-heat protection

Direct Thermal Protection Device
Controller supplied

On- board Independent smoke and fan control with timers and count down readouts.

4x fast access buttons for Haze and Smoke output and Fan override.
Control Options

Closed contact trigger
DMX input

On-board 2 channels required for variable fog output and fan speed.
0-10v input

Use remote socket Pin 1 (GND) and Pin 3 (Input)
Analog link

N/A
Fluid capacity

2x 9.5 litre
Recommended fluid

Pro Smoke Studio (DX Mix)

Pro Smoke Super (ZR Mix)

Pro Smoke Super (Fragranced)

Pro Smoke High Density (SP Mix)
Fluid consumption (max.)

500ml/min

0.13 Imp. gallon/min
Fluid level sensing

Standard
Input fluid pipe diameter

4x O/D 4mm
Smoke Output (max.)

5000 cubic metres/min

176.573 cubic feet/min
Dimensions of Machine

980mm x 740mm x 760mm
Dimensions when boxed

1120mm x 810mm x 930mm
Weight (no fluid)

166.5kg
Weight (with fluid)

184.5kg
Drip tray

N/A
Installation Details

The machine should be located in a well-ventilated area with a minimum of 200mm air space around the sides and top of the machine.

The machine should only be used on level surfaces.

The initial smoke output of the machine is hot, so the front of the machine should at least 1 metre from surfaces or people.

Never leave the machine running unattended.

Do not install above people’s heads
Flying kit

4x Eye bolts fixed on unit.
Ducting kit

TBA
Output nozzle size

300mm.
Max length of remote cable

50 metres (5 metres supplied)
Accessories

Ducting system
Sample project specification

Description
Now Jem offers the next generation of the Roadie, The Roadie X-stream is a high powered industial specification smoke machine for long throw smoke projection.

Soft Start Electronics
The "crack" created during the initial burst of smoke is caused by the pump pressure overcoming the incredible back pressure of the heat exchanger. Jem´s unique Soft Start Electronics gradually powers the pump, eliminating this crack and ensuring a quieter and smoother operational level following initial start up.

Heat exchanger
All Jem heat exchangers are designed for high efficiency performance. Only the purest grade LM24 aluminum is used in the production process which eliminates the risk of porosity (pockets of gas within the casting which can cause heater failure). All heat exchangers contain cuprous helicoils of at least 2.8 meters in length, ensuring a continuous flow of pure, dry, white smoke.

Electronic Pump Ramping
Jem was the original pioneer of EPR, an intelligent means of warning of a drop in temperature which could result in ´wet smoke´ (residue). The pumps respond to this signal by running slower and pumping less fluid, thus allowing the heaters to restore optimum operational temperature. This guarantees a continuous flow of smoke using highly efficient, lower wattage heaters.

Electronic Low Fluid Cut-off System
This technology is fitted to all machines designed for continuous operation. To eliminate the risk of running dry and burning out the pump, this unique electronic sensing system will automatically shut-off the machine, protecting all major components.

Analogue Link
Whether you´ve run out of DMX channels or simply want to link two smoke machines together and operate them from a single remote, Jem´s analogue link facility is the solution. This feature even allows multi-machine connection, making operation a simple one-finger action.

Jem Multifunctional Remote
This reliable remote offers more than the usual auto timer and smoke level output controls. Easily engaged, the timer gives complete adjustment for both ´Fog On´ and ´Fog Delay´ modes. These timer functions can be expanded even further by engaging Jem´s unique ´8X Mode´ which multiplies the selected timer setting by eight.

DMX Control
This uses a single channel of DMX 512 giving a full variable output from the machine. This important feature means that atmospheric effects can now become choreographed into the Light show or stage performance via the lighting console.

On-Board Remote System
Greatly appreciated by rental companies, this hand-held remote can be stored during transit on-board the machine, making it easy to find at show time and eliminating transit vulnerability. But storage isn´t the only advantage. Portability is greatly enhanced by having on board controls.

Direct Thermal Protection Device
This small yet crucial component is the last line of defense against catastrophic failure. Other manufacturers still depend on cheap plastic whereas Jem´s DTPD is made from a solid ceramic composite. This guarantees extremely precise overheat monitoring and is unaffected by ambient temperature changes.

Max Power Consumption
23A @ 220v (single phase)

Maximum Smoke Output (approx.)
5000 cubic metres/min
176,573 cubic feet/min

Fluid container
All Jem smoke, haze and heavy fog machines are designed to carry removable fluid containers of varying sizes depending on the models application. The removable container makes for quicker refills and protects the machine from damage through spillage in transit.

Maximum Fluid Consumption
500ml/min
0.13 Imp. gallon/min

Accessories
Ducting system
TBA

Included items
Jem Multifunctional remote control
2x 9.5 litre fluid container (empty)
Instructions for use manual

Recommended fluids
Pro Smoke Studio (DX Mix)
Pro Smoke Super (ZR Mix)
Pro Smoke Super (Fragranced)
Pro Smoke High Density (SP Mix)